Notifications
Clear all

[3D Print Settings] Setting for best results?

9 Posts
4 Users
0 Reactions
6,449 Views
Posts: 68
Trusted Member
Topic starter
 
[#164]

Hi Wiya3d community. I am here to ask you a noob question

what are the best settings to set up on a print for the best results?


This topic was modified 1 day ago by WiYa3D
 
Posted : 09/03/2021 2:00 pm
Posts: 47
Eminent Member
 

Start slow, 40-60mm and with a low nozzle temp, 185 for PLA. Print a test object, and then reprint with faster/hotter settings. Tune one thing at a time


 
Posted : 09/03/2021 2:27 pm
Posts: 68
Trusted Member
Topic starter
 
Posted by: @zayden

Start slow, 40-60mm and with a low nozzle temp, 185 for PLA. Print a test object, and then reprint with faster/hotter settings. Tune one thing at a time

That's cool, by the way what's your personal setting for the best result. Did you use the same function ? 

 


 
Posted : 09/03/2021 2:33 pm
Posts: 47
Eminent Member
 
Posted by: @raylan
Posted by: @zayden

Start slow, 40-60mm and with a low nozzle temp, 185 for PLA. Print a test object, and then reprint with faster/hotter settings. Tune one thing at a time

That's cool, by the way what's your personal setting for the best result. Did you use the same function ? 

 

I like to use the nickel test for my calibration, it prints fast and tests a few things at one.


 
Posted : 09/03/2021 2:36 pm
Posts: 68
Trusted Member
Topic starter
 
Posted by: @zayden

I like to use the nickel test

Never head about Nickel test?

 

 
Posted : 09/03/2021 2:36 pm
Posts: 47
Eminent Member
 
Posted by: @raylan
Posted by: @zayden

I like to use the nickel test

Never head about Nickel test?

 

Just look at this thingiverse.com/thing:11261


 
Posted : 10/03/2021 1:26 pm
Posts: 73
Trusted Member
 

It's not an answerable question. There is no 'best' - only 'best for you.'


 
Posted : 10/03/2021 1:27 pm
Posts: 51
Trusted Member
 
Posted by: @spike

It's not an answerable question. There is no 'best' - only 'best for you.'

I think he's asking everybody what's the best settings for YOUR printer. layer height, app, temp, filament type, print speed, etc...

 


 
Posted : 10/03/2021 1:28 pm
Posts: 73
Trusted Member
 
Posted by: @tucson
Posted by: @spike

It's not an answerable question. There is no 'best' - only 'best for you.'

I think he's asking everybody what's the best settings for YOUR printer. layer height, app, temp, filament type, print speed, etc...

 

For my Makerbot Replicator 2, in general I always heat my PLA to 220, I always use 10% infill, and I always use 2 shells 


 
Posted : 10/03/2021 1:29 pm